Nonmetallic U-bolts

Standard Dimensions:

  • Hole Diameter: 13/32"

  • Hole Spacing (From End): 13/32"
    Accommodates 3/8"
    Hardware

  • Hole Spacing (On Center): 1-5/8"

  • Width: 1-5/8"

  • Thickness: 3/8"
Part~No. Size --A-- --B-- --C-- --D--
UB-050 1/2 0.937 0.375 1.568 2.412
UB-075 3/4 1.125 0.375 1.662 2.6
UB-100 1 1.375 0.375 1.787 2.85
UB-125 1-1/4 1.687 0.375 1.943 3.162
UB-150 1-1/2 2 0.375 2.1 3.475
UB-200 2 2.437 0.5 2.468 4.187
UB-250 2-1/2 2.937 0.5 2.718 4.687
UB-300 3 3.562 0.5 3.031 5.312
UB-350 3-1/2 4.062 0.5 3.281 5.812
UB-400 4 4.562 0.5 3.531 6.312
UB-600 6 6.75 0.625 5.75 9.875
*Torque and load values shown represent a 3:1 safety factor.





  • Note: Plate not included. Illustration purpose only
  • Aickinstrut Nonmetallic U-Bolts provide a corrosion resistant alternative to traditional metallic U-Bolts.
  • Made from glass-reinforced polyurethane, these bolts will outlast stainless steel in most corrosive applications.
  • Nonmetallic U-Bolts have oversized diameters which allow them to hold steel conduit and plastic pipe.
  • Each U-Bolt comes with two polyurethane hex nuts. Additional nuts and washers can be purchased separately.
  • The U-Bolts can also be installed to allow for thermal expansion and contraction of plastic pipe as shown here.